*The network management system can be stacked up to 4 systems.
*10M,100M,full & half duplex are optional via network management.
*Support bandwidth options control:2.5M,5.0M,7.5M,10M,25M,50M,75M,100M.
*Support port flag.
*Support legal maximum packet size up to 1912 bytes,support CISCO,ISl&VTP.
*Support the dominicial backup fiber converter mode to enhance the safety of the network.
*Support system auto refresh regularly, protect from system halted.
*Remote management software upgrade through Internet or through local console port.
| This kind of rack mount media converter has a Network Management Unit (MCU). The whole rack contains 16 pieces of media converter modules and 1 piece of network management card. Each module can be used separately and different kind of converter modules can be inserted into the same rack. The rack mount media converter adopts communication isolation technology to separate the system power from the converter module totally so that the dependability of the whole system can be Guaranteed. | |
|
The network management of 2U Pack Mount Enhanced Network Managed Media Converter is capable to manage the network.This network management polls the active fiber module, displays the the type of installed cards, link status as well as other important information.The Network Management also enables/disables each port on the Line Cards,enables module loop-back testing and provides the ability to configure system parameters such as the system IP address. The system supports up to 16 Line Cards and each MCU can work with RJ-45 interface or fiber interface. By combining the TX and the optional FX port on the MCU card, all Line Cards are hot swappable and redundant power supplies option is available.The MCU module provides four ways to manage the Optoscape chassis, LineCards and Fiber infrastructure. ORDERING INFORMATION:
|
-
-
10/100Mbps Media Converter$0.01
-
-
3U rack Media Converter$0.01
-
-
2U Rack Mount Media Converter$0.01
-
-
EJET-E1-4ETH Protocol Converter$0.01
