* Half/full duplex auto-negotiation, support VLAN.
* RJ45 interface support auto-mdix.
* Provide 2 clock types: E1 master clock, E1 line clock.
* provide 3 loop functions: local loop, to remote loop, order remote loop.
* Have pseudo random code test function, easy the installation and maintenance.
* support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
* Have Ethernet monitor self-reset function, equipment will not dead.
* provide detecting realtime Ethernet communication status
* RJ45 interface support auto-mdix.
* Provide 2 clock types: E1 master clock, E1 line clock.
* provide 3 loop functions: local loop, to remote loop, order remote loop.
* Have pseudo random code test function, easy the installation and maintenance.
* support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
* Have Ethernet monitor self-reset function, equipment will not dead.
* provide detecting realtime Ethernet communication status
|
:: Detail
|
|
| This convertor provide conversion from ITU-T G.703 E1 channel to Ethernet interface. used widely in connecting between WAN and LAN, monitoring,etc. E1 interface: interface standard: according with G.703 Interface Rate 2.048Mbps+-50ppm Jitter tolerance according with G.742 and G.823. transmission capability 1*E1 clock inter-clock, line-clock connector BNCi75ΩjARJ45i120Ωj E1 Impedance 75Ω(unbalance), 120Ω(balance). 10/100 Base-T interface: Interface Rate: 10/100Mbps full and half duplex auto-negotiation Interface character match IEEE802.3, IEEE802.1Q(VLAN). Connector RJ45, Auto fit for straight and cross MAC address capability 4096 working Environment: power supply AC220VGAC 110V GDC ?48VGDC +24V power consumption ≤5W working temperature: 0°C ~ 50°C storage temperature: -40°C ~ +70°C humidity: 95 % |
We suggest
-
-
EJET-E1-ETH Protocol Converter$0.01
-
-
10/100Mbps Media Converter$0.01
-
-
Gigabit Media Converter$0.01
-
-
2U Rack Mount SNMP Network Managed Media Converter$0.01
-
-
2U Rack Mount Media Converter$0.01
